TECHNICAL SPECIFICATION OF

GREASE FILLING MACHINE

WITH PNEUMATIC LIFT

1. Material - Industrial Grease

2. Range - 200 g to 1000g.

3. Hopper Capacity - 35 Ltr. Approx. made out of

16 swg., S.S. 304 Sheet

4. Material Flow - By Rotating Auger

5. Flow Control - Digital Programmable Timer

6. Fill Setting - With Key Pad Switch’s

7. Fill Accuracy - ± 1.5 %

8. Filling Rate - 100 gms. / sec. OR Better

9. Augor Control - By E / M Clutch Break Unit

10. Drive Transfer - Using ‘V’ Belt

11. Augor Drive Motor - 1 H.P., 3 Phase, 415 V A.C.

12. Mixer / Wiper Drive - Using additional Gear Motor

capacity 0.5 HP with suitable starter

13. Power Supply - 415 V A.C., 3 Phase 4 Wire

14. Compress Air Supply - @ 6 kg / cm²

Consumption : 15 LPM

15. General Construction - The Machine fabricated

out of M.S. Angle, sheet etc,

hopper and all other contact parts

are made out of S.S. 304 and

wiper strips of PTFE

AUTO TIN LIFTING

Electro Pneumatically operated Tin Lifting arrangement is provided to remove human error during grease filling operation. The grease being lighter material

needs to be pressure filled in the container. A manual operation of holding the tin below nozzle and lowering it during filling cycle is eliminated to obtain accuracy.